Irrigate Wisely to Protect Groundwater

Protecting groundwater should be a concern for every Oregon resident. Most rural residents rely on groundwater for drinking, watering livestock, and irrigation of gardens and/or agricultural crops. Thereby, it is important to follow some best management practices to reduce to non-point source pollution. Nonpoint source pollution is contamination that cannot be attributed to one large source but many small sources that individually seem insignificant but cumulatively can result in large impacts on the environment.

 Nitrate is a common non-point source pollutant that is being found in more and more groundwater supplies throughout Oregon. Nitrate is a form of nitrogen that moves easily through the soils with water. You might wonder where the nitrate comes from; fertilizers, pesticides, and animal waste are some of the most common sources. Northern Malheur County, Lower Columbia Basin, and the Southern Willamette Valley all have established Groundwater Management Areas to address high levels of nitrate contamination found in rural drinking water supplies. Nitrate levels above the EPA limit of 10ppm or mg/L for public drinking water supplies is considered a health risk. Levels below 10ppm are considered safe for people of all ages to consume, however if the level is approaching 10ppm pregnant or nursing women and infants are not encouraged to drink the water. No matter what area in Oregon you reside following a few simple irrigation management practices will help protect groundwater.

Schedule irrigations using available soil moisture and crop water use requirements.

Don’t over irrigate! This sounds relatively simple but most folks would rather err on the side of over watering than under watering. Over watering can cause stress to the crop and also nitrogen deficiency from leaching. Take the time evaluate and graph soil moisture. Soil moisture sensors

are readily available or you can even use a shovel and your fingers. In addition, the AgriMet system, and online tool, provides daily charts showing the ET (evapotranspiration) rates, and is a fairly accurate estimate of crop water use. Combine the tools together to help you plan a tailored irrigation schedule.

Time irrigation to keep water in the rooting zone.

Know your soil! Irrigation shouldn’t be used to fill the soil to field capacity. By knowing your individual soil’s available water holding capacity you can vary the length of time you irrigate. Using a more frequent but lighter irrigation schedule helps keep water in the root zone where plants can use it, and reduces the amount of nitrate that can leach. Don’t forget to account for the weather and time of year. For example, manage your irrigation applications to keep any stored water to a minimum in the fall.

Adjust application rates to meet crop requirements during different growth stages.

Know your crop! Each crop consumes various amounts of water from planting to harvest. Certain stages of growth may require more or less water, understanding the growth stages of your crop is crucial to providing the right amount of water. Most crops can tolerate a reduced level of available water capacity that won’t affect the crop quality or yield. The typical range is between 40-60% so keeping an irrigation schedule that fulfills the crops water need and doesn’t allow the soil to dry below that level is imperative.

Keep applications uniform and accurate.

Make sure that whichever irrigation systems that are used have a consistent and even flow being applied across the entire area being irrigated. Without this consistency you may be over watering and leaching nutrients in one area of the field while another is being under watered – affecting total crop yields.

Follow label directions when using fertilizers.

Label directions should always be followed, as well as working with guidelines from a current soil test. It can be a balancing game of applying the right amount for the crop at the right time. Excessive application creates a higher level of probability of leaching contaminates into the groundwater, and in addition wastes the money invested in the product. While under application can show little or no effect on the overall crop quality and yield, taking time to incorporate a few irrigation basic management practices into your system can help protect Oregon’s groundwater, the health of your family, conserve water, save money, all while producing a high quality crop.

Ask an Expert

Have a Question? Ask an Expert!

Ask an Expert is a way for you to get answers from the Oregon State University Extension Service. We have experts in family and health, community development, food and agriculture, coastal issues, forestry, programs for young people, and gardening.

Ask Us a Question