Maple syrup is one of the oldest forms of sweeteners, its use dating back hundreds of years. Maple syrup comes from maple tree sap, which is collected from living trees and boiled down to the thick, sweet syrup many of us like to pour over our pancakes.
The sugar maple tree (Acer saccharum) is most commonly used in maple sugaring, but all maples produce sap that can be converted to maple syrup. Though not as high in sugar content as the sugar maple, the sap of bigleaf maple trees (Acer macrophyllum) grown in the Pacific Northwest produces excellent syrup. In addition to the delicious flavor, maple sap and syrup are high in minerals, such as potassium, calcium, magnesium, manganese, iron, and zinc, and can boost your energy without spiking your blood sugar level.
Bigleaf maple characteristics
Bigleaf maple trees tend to grow in coarse, gravelly, moist soils and among mixed groups of trees such as red alder, Douglas-fir, and western hemlock. The best bigleaf maple trees to tap are those with a wide-open crown and a trunk diameter between 4 and 18 inches. Young maples forming clusters of multiple shoots, or suckers, tend to work well due to their smooth bark and expansive root system. The bark of older bigleaf maple trees is grayish-brown and shallowly grooved, which makes tapping more difficult.
In the Pacific Northwest, sap collection is done in the late fall and winter (after the leaves have dropped) through early spring prior to bud-break. The sap is made up of water, dissolved minerals, sugars, vitamins, and amino acids. It moves from the roots of the tree up the stem through the sapwood to provide water and nutrients to various parts of the tree. This happens when nighttime temperatures are at or near freezing. During the day when the temperature warms, sap flows back down the tree. The sap flow quantity and quality will depend on weather conditions, available moisture, and the soil type. Concentrations of micro- and macronutrients that are in the soil will have an effect on the color and taste of the maple syrup.
Collecting sap
Begin by gathering supplies. You will need:
- A spile (a specialized spout inserted into the tree for the sap to flow through)
- A drill
- A drill bit (sized to fit the width of the spile)
- Hammer
- Tubing (or use a sap bag)
- A container to catch sap
To start the maple sugaring process, you’ll need to tap a tree by drilling a hole at a slight upward angle into the trunk of the tree at a comfortable working height. The width of your drill bit should be equivalent to that of your spile. Most spiles require either a 7/16- or 5/16-inch bit. If you are using a 7/16-inch spile, drill the hole 2 to 21/2 inches into the tree. If you are using a 5/16-inch spile, drill the hole 11/4 to 2 inches deep. Gently tap the spile into the hole with a hammer; the fit should be snug. If the sap is flowing, you should immediately see sap dripping from the spile. Attach tubing to the spile to allow the sap to flow downwards into the collection container. A plastic milk jug works well as a collection container because it is a closed collection system that keeps out debris, insects, and rainwater. Sap bags also work well and can be attached directly to the spile. When the sap is flowing, collect it daily. Store the sap at a temperature of 38°F or colder and use within 7 days of collection. Boil the sap prior to use to eliminate any possible bacterial growth. You can store the sap in your freezer for longer-term storage. Tap trees only once per season and remove spiles in the spring to allow the bark to heal.
Making syrup
Making syrup requires a different set of supplies than maple sugaring. You will need large pots, a stove, filter paper, a funnel, a candy thermometer, and glass containers to store the syrup. You’ll also need time; boiling down gallons of sap takes a lot of it. Here are the steps to make syrup:
- Boil the excess water from the sap. A large quantity of steam is generated by boiling sap. So, it is best to do this process outside. Indoors, process small batches and ensure good ventilation.
- Continue to boil the sap until it takes on the consistency of syrup. Using a candy thermometer, check the temperature and finish the boil when the temperature reaches 7°F above the boiling point of water. The boiling point of water differs based on your elevation, so at sea level, the syrup is finished at 219°F.
- Strain the hot syrup through a filter to remove the natural mineral deposits, called “sugar sand.”
- Pour syrup into a sterile jar and seal. Store in the refrigerator up to 2 months.
It takes about 40 parts maple sap to make 1 part maple syrup. That means it takes 10 gallons of sap to make 1 quart of syrup.
Trade-name products and services are mentioned as illustrations only. This does not mean that the Oregon State University Extension Service either endorses these products and services or intends to discriminate against products and services not mentioned.
© 2017 Oregon State University
Published and distributed in furtherance of the Acts of Congress of May 8 and June 30, 1914, by the Oregon State University Extension Service, Washington State University Extension, University of Idaho Extension, and the U.S. Department of Agriculture cooperating. The three participating Extension services offer educational programs, activities, and materials without discrimination on the basis of race, color, national origin, religion, sex, gender identity (including gender expression), sexual orientation, disability, age, marital status, familial/parental status, income derived from a public assistance program, political beliefs, genetic information, veteran’s status, reprisal or retaliation for prior civil rights activity. (Not all prohibited bases apply to all programs.) The Oregon State University Extension Service, Washington State University Extension, and University of Idaho Extension are an AA/EOE/Veterans/Disabled.