Introduction
assembling and disassembling your
kitchenaid tilt head stand mixer is
simple when you follow these easy steps
to attach a bowl first slide the control
Attaching a bowl
knob to the off setting making sure the
power cord is unplugged or that your
power supply is off then raise the tilt
head into the upright position fit the
bottom of your bowl onto the clamping
plate and turn gently in a clockwise
direction
to detach a stand mixer bowl after use
follow these simple steps turn the speed
control knob to off unplug the mixer
from its power supply raise the tilt
head turn counterclockwise until you
feel the bolt detach then lift
Securing the beater
when you're ready to start mixing attach
the beater by first turning the speed
control knob to off and unplug the power
supply raise the tilt head into an
upright position and simply slip the
beater onto the shaft press upward as
far as you can then turn right to secure
the beater on the beater pin
this process is the same whether you're
attaching a flat feeder wire whip or
dough hook
Detaching the beater
to detach a beater you'll need to turn
the speed control knob to off and unplug
the power supply again raise the tilt
head and then press the beater upward as
far as you can before turning left to
slip it out from the securing pin within
the shaft now you can gently pull the
beater out from the beater shaft again
this process remains the same for
detaching a flat beater wire whip or
dough hook
you can learn tips and tricks or
discover mixers accessories and
attachments on our website
explore more today at kitchenaid.com
[Music]
